Your home’s temperature can be lowered with the help of an evaporative cooler, sometimes known as a “swamp cooler.” This type of cooler works by passing air over specific pads, the temperature of the air drops as it travels through the moist pads that are placed there. After that, the system will circulate this air throughout your house.
In this post, we will present you with five helpful hints that will assist you in maximizing the performance of your device.
1. Determine The Best Time Of Day To Do It
Your evaporative cooler achieves its cooling effect by taking advantage of the large temperature variations that exist between the evaporative cooler pads, the water, and the air outside. If you want the greatest results, you should be sure to run your unit when it’s the warmest during the day.
In addition to that, be mindful of the level of humidity. If the humidity is greater than 50%, your air conditioner will not function as efficiently as it should. Therefore, while it’s raining outside, turn on your ceiling fans.
2. Keep The Cooling Pads Clean And Replace Them As Necessary
If you want your unit to create any cold air at all, the cooling pads on it need to function properly. For this reason, it is essential to maintain a clean environment and preserve the integrity of the pads. At the very least, you should change out your cooler pads once a year after the summer.
When you clean your device, you should also rinse off any debris that might be obstructing airflow through the pads.
3. Ensure That Your Space Is Always Clean
Evaporative coolers are susceptible to rapid filth buildup since water is required for their operation. If you find that the performance of your unit has changed, it is possible that you need to clean it. Take the pads off and have a look at the frame of the device. Scrub with a wire brush to remove any scale or dirt that may have accumulated.
You should give your system a thorough cleaning at least twice a year, once before you use it for the first time and once after the current season has ended. Additionally, to limit the possibility of electrical problems, you should have your system serviced by a trained specialist at least once every year.
4. Ensure That The Appropriate Amount Of Water Is Present
If you want the most performance out of your cooling pads, you should keep them moist rather than wet or dry. During the summer, you should check the water level once every few weeks. In the majority of coolers, the tank should always have around three inches worth of water in it.
You should reference your user handbook, any marks that are found within the tank, or a heating and conditioning specialist to establish the optimal water level for your machine.
5. Instead Of Working More, Run The Unit More Efficiently
Evaporative coolers that are more than a decade old often feature two switches: one for the pump and one for the fan. If you have two switches, wait to turn on the fan until after you’ve let the pump run for a few minutes. This will ensure that the pump is working properly. This step allows your device some time to soak the cooling pads with liquid.
Think about putting in a thermostat if you want to cut down on the amount of time you have to spend checking on your device. When the temperature inside your home reaches the setting that you’ve programmed the thermostat for, the evaporative cooler thermostat will shut off automatically.